Follow Ercolina:

"We purchased our Ercolina Top Bender back in the early 90's and when it came time to upgrade we didn't think twice about buying a new Ercolina Mega Bender. I could never imagine going back to using elbows, with all the welding, grinding and labor involved."

Bob Cavanagh, Mid Island Steel

"The machines are a very solid product. We used the first bender so much we got another one a couple years later and use them both daily. The roller we have works very well for us on many jobs and is used every few months as the specific jobs dictate. It is nice to know that we have dependable machines to get the jobs out the door in a timely manner. Production time has reduced and that helps the bottom line.

Good People
Good Machines
Reasonable price, would buy again, thanks Dave."

Richard Fox, Vice President/Shop Supervisor, RAMCO

Rotary Draw Square Tube Tooling

Tube Size	Outside Diameter	Wall Thickness	Minimum CLR Inches / Millimeter	Hex Shaft	Center Former Part#	Counterbend Die Part#
3/8"	.375	.065	1.4 / 36	40mm	1582AR0360375	1591A0375
3/8"	.375	.049	1.8 / 46	40mm	1582AR0460375	1591A0375
1/2"	.500	.065	1.4 / 36	40mm	1582AR0360500	1591A0500
1/2"	.500	.049	1.8 / 46	40mm	1582AR0460500	1591A0500
5/8"	.625	.065	1.4 / 36	40mm	1582AR0360625	1591A0625
5/8"	.625	.049	1.8 / 46	40mm	1582AR0460625	1591A0625
5/8"	.625	.035	2.6 / 67	40mm	1583AR0670625	1591A0625
3/4"	.750	.120	1.8 / 46	40mm	1582AR0460750	1591A0750
3/4"	.750	.065	2.6 / 67	40mm	1583AR0670750	1591A0750
7/8"	.875	.120	2.6 / 67	40mm	1583AR0670875	1591A0875
7/8"	.875	.065	3.2 / 82	40mm	1583AR0820875	1591A0875
7/8"	.875	.049	4.4 / 112	40mm	1586AR1120875	1591A0875
1"	1.000	.120	3.0 / 76	40mm	1583AR0761000	1591A1000
1"	1.000	.120	3.2 / 82	40mm	1583AR0821000	1591A1000
1"	1.000	.083	3.9 / 100	50mm	1585AR1001000	1591A1000
1"	1.000	.078	4.4 / 112	40mm	1586AR1121000	1591A1000
1"	1.000	.065	5.1 / 130	50mm	1587AR1301000	1591A1000
1"	1.000	.049	5.9 / 150	50mm	1588AR1501000	1591A1000
1-1/4"	1.250	.120	5.1 / 130	50mm	1587AR1301250	1591A1250
1-1/4"	1.250	.109	5.9 / 150	50mm	1588AR1501250	1591A1250
1-1/4"	1.250	.095	6.6 / 170	50mm	1589AR1701250	1591A1250
1-1/4"	1.250	.083	7.4 / 190	50mm	15810AR1901250	1591A1250
1-1/2"	1.500	.120	5.9 / 150	50mm	1588AR1501500	1591A1500
1-1/2"	1.500	.109	6.6 / 170	50mm	1589AR1701500	1591A1500
1-1/2"	1.500	.095	7.4 / 190	50mm	15810AR1901500	1591A1500
2"	2.000	.120	5.9 / 150	50mm	1588AR1502000	1591A2000
2"	2.000	.109	6.6 / 170	50mm	1589AR1702000	1591A2000
2"	2.000	.095	7.4 / 190	50mm	15810AR1902000	1591A2000

Large materials may slip slightly during bend cycle.
Consult factory for tooling sizes not shown.

Content on this page requires a newer version of Adobe Flash Player.

Follow Ercolina:

Rotary Draw Square Tube Tooling