"We purchased our Ercolina Top Bender back in the early 90's and when it came time to upgrade we didn't think twice about buying a new Ercolina Mega Bender. I could never imagine going back to using elbows, with all the welding, grinding and labor involved."

Bob Cavanagh, Mid Island Steel

MegaBender^® Pipe Bender Ring Roll Capacities

All bending capacities based on mild steel

Material	Dimensions	Wall Thickness	Radius in inches	Roll Type
Tube or Pipe	7/8" pipe 1-1/2" pipe 2" tube	SCH40 SCH40 .118	4.000 11.900 19.850	RT TI TI
Square tube	3/4" 1-1/2"	.059 .079	7.940 31.760	SR SR-TI
Rectangular tube "Hard way"	1-3/16" x 3/8" 1-1/2" x 3/4"	.059 .100	7.940 19.850	SR SR-TI
Rectangular tube "Easy way"	1-3/16" x 3/8" 2" x 1"	.079 .100	9.925 19.850	SR SR-TI
Oval tube "Hard way"	1-3/16" x 3/8" 2" x 1"	.059 .108	7.940 23.820	SR SR-TI
Oval tube "Easy way"	1-3/16" x 3/8" 2" x 1"	.108 .108	7.940 23.820	SR SR
Round solid	3/4" 1-3/16"	NA NA	3.170 4.000	RT RT-TI
Square solid	9/16" 1-3/16"	NA NA	3.170 7.940	RS RS-TI
Square solid twist	9/16" 1"	NA NA	4.000 11.900	SR SR-TI
Rectangular solids "Hard way"	3/4" x 3/8" 1-1/2" x 3/8"	NA NA	3.570 7.940	RS RS
Rectangular solids "Easy way"	1-1/2" x 3/16" 2-3/8" x 9/16"	NA NA	4.000 8.930	RS RS-TI
Angle leg out	1-3/16" x 1-3/16" 1-1/2" x 1-1/2"	.118 .250	5.160 9.920	RS RS
Angle leg in	NA NA	NA NA	NA NA	NA NA
T leg out	1-3/16" x 1-3/16" 1-1/2" x 1-1/2"	.118 .187	4.000 9.920	RS RS-TI
T leg in	1-3/16" x 1-3/16" 1-1/2" x 1-1/2"	.118 .250	4.000 9.920	SR SR-TI
C leg out	1-3/16" x 1-3/16" 2-3/8" x 1-3/16"	.118 .156	4.000 9.920	SR ST-TI
C leg in	1-3/16" x 9/16" 2-3/8" x 1-3/16"	.156 .156	4.960 9.920	SR ST-TI
C-leg up	1-3/16" x 9/16" 2-3/8" x 1-3/16"	.156 .156	11.910 13.890	SR ST-TI