"We purchased our Ercolina Top Bender back in the early 90's and when it came time to upgrade we didn't think twice about buying a new Ercolina Mega Bender. I could never imagine going back to using elbows, with all the welding, grinding and labor involved."

Bob Cavanagh, Mid Island Steel

Mandrel BenderTooling

The following information must be supplied when ordering mandrel tooling:

Profile shape, inside diameter, outside diameter, wall thickness, material type, minimum distance between bends, and number of bends per day required. It is recommended dimensional drawings of finished product be supplied with mandrel tooling order.

CLR Range	Center Former	Pressure Die	Wiper Die	Clamp Die	Steel Plug Mandrels	Brass Plug Mandrels	Steel Ball Mandrels	Brass Ball Mandrels	Steel Spheres	Brass Spheres
.375 -750	AR19	A20	A24	A22	A21R/1	A21R/3	A21S/1	A21S/3	A21BS/1	A21BS/3
.751-1.340	AR34	A20	A24	A22	A21R/1	A21R/3	A21S/1	A21S/3	A21BS/1	A21BS/3
1.341-1.570	AR40	A20	A24	A22	A21R/1	A21R/3	A21S/1	A21S/3	A21BS/1	A21BS/3
1.571-1.970	AR50	A20/1	A24/1	A22/1	A21R/2	A21R/4	A21S/2	A21S/4	A21BS/2	A21BS/4
1.971-2.360	AR60	A20/1	A24/1	A22/1	A21R/2	A21R/4	A21S/2	A21S/4	A21BS/2	A21BS/4
2.361-2.760	AR70	A20/1	A24/1	A22/1
2.761-3.150	AR80	A20/1	A24/1	A22/1
3.151-3.540	AR90	A20/1	A24/1	A22/1
3.541-4.330	AR110	A20/1	A24/1	A22/1
4.331-5.510	AR140	A20/1	A24/1	A22/1
5.551-6.300	AR160	A20/1	A24/1	A22/1
6.301-7.090	AR180	A20/1	A24/1	A22/1
7.091-7.870	AR200	A20/1	A24/1	A22/1

All Mandrel tooling is considered special tooling
and requires a 50% deposit upon order.